Windows Installer Error Messages

Modified on: 2018-01-04 10:03:02 -0500



Code
Message

Remarks
1101
Could not open file stream: [2]. System error: [3]


1301
Cannot create the file '[2]'. A directory with this name already exists.


1302
Please insert the disk: [2]


1303
The Installer has insufficient privileges to access this directory: [2].


1304
Error writing to File: [2]


1305
Error reading from File: [2]; System error code: [3]


1306
The file '[2]' is in use. If you can, please close the application that is using the file, then click Retry.


1307
There is not enough disk space remaining to install this file: [2]. If you can, free up some disk space, and click Retry, or click Cancel to exit.


1308
Source file not found: [2]


1309
Error attempting to open the source file: [3]. System error code: [2]


1310
Error attempting to create the destination file: [3]. System error code: [2]


1311
Could not locate source file cabinet: [2].


1312
Cannot create the directory '[2]'. A file with this name already exists. Please rename or remove the file and click Retry, or click Cancel to exit.


1313
The volume [2] is currently unavailable. Please select another.


1314
The specified path '[2]' is unavailable.


1315
Unable to write to the specified folder: [2].


1316
A network error occurred while attempting to read from the file: [2]


1317
An error occurred while attempting to create the directory: [2]


1318
A network error occurred while attempting to create the directory: [2]


1319
A network error occurred while attempting to open the source file cabinet: [2].


1320
The specified path is too long: '[2]'


1321
The Installer has insufficient privileges to modify this file: [2].


1322
A portion of the folder path '[2]' is invalid. It is either empty or exceeds the length allowed by the system.


1323
The folder path '[2]' contains words that are not valid in folder paths.


1324
The folder path '[2]' contains an invalid character.


1325
'[2]' is not a valid short file name.


1326
Error getting file security: [3] GetLastError: [2]


1327
Invalid Drive: [2]


1328
Error applying patch to file [2]. It has probably been updated by other means, and can no longer be modified by this patch. For more information contact your patch vendor. System Error: [3]

Available with Windows Installer version 1.1 and later.
1329
A file that is required cannot be installed because the cabinet file [2] is not digitally signed. This may indicate that the cabinet file is corrupt.

Available with Windows Installer version 2.0.
1330
A file that is required cannot be installed because the cabinet file [2] has an invalid digital signature. This may indicate that the cabinet file is corrupt.{ Error [3] was returned by WinVerifyTrust.}

Available with Windows Installer version 2.0.
1331
Failed to correctly copy [2] file: CRC error.

Available with Windows Installer version 2.0.
1332
Failed to correctly move [2] file: CRC error.

Available with Windows Installer version 2.0.
1333
Failed to correctly patch [2] file: CRC error.

Available with Windows Installer version 2.0.
1334
The file '[2]' cannot be installed because the file cannot be found in cabinet file '[3]'. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.

Available with Windows Installer version 2.0.
1335
The cabinet file '[2]' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.

Available with Windows Installer version 2.0.
1336
There was an error creating a temporary file that is needed to complete this installation. Folder: [3]. System error code: [2]

Available with Windows Installer version 2.0.
1401
Could not create key: [2]. System error [3].


1402
Could not open key: [2]. System error [3].


1403
Could not delete value [2] from key [3]. System error [4].


1404
Could not delete key [2]. System error [3].


1405
Could not read value [2] from key [3]. System error [4].


1406
Could not write value [2] to key [3]. System error [4].


1407
Could not get value names for key [2]. System error [3].


1408
Could not get sub key names for key [2]. System error [3].


1409
Could not read security information for key [2]. System error [3].


1410
Could not increase the available registry space. [2] KB of free registry space is required for the installation of this application.


1500
Another installation is in progress. You must complete that installation before continuing this one.


1501
Error accessing secured data. Please make sure the Windows Installer is configured properly and try the install again.


1502
User '[2]' has previously initiated an install for product '[3]'. That user will need to run that install again before they can use that product. Your current install will now continue.


1503
User '[2]' has previously initiated an install for product '[3]'. That user will need to run that install again before they can use that product.


1601
Out of disk space -- Volume: '[2]'; required space: [3] KB; available space: [4] KB


1602
Are you sure you want to cancel?


1603
The file [2][3] is being held in use by the following process: Name: [4], Id: [5], Window Title: '[6]'.


1604
The product '[2]' is already installed, and has prevented the installation of this product.


1605
Out of disk space -- Volume: '[2]'; required space: [3] KB; available space: [4] KB. If rollback is disabled, enough space is available. Click Cancel to quit, Retry to check available disk space again, or Ignore to continue without rollback.


1606
Could not access location [2].


1607
The following applications should be closed before continuing the install:


1608
Could not find any previously installed compliant products on the machine for installing this product


1609
An error occurred while applying security settings. [2] is not a valid user or group. This could be a problem with the package, or a problem connecting to a domain controller on the network. Check your network connection and click Retry, or Cancel to end the install. Unable to locate the user's SID, system error [3]

Available in Windows Installer version 2.0.
1651
Admin user failed to apply patch for a per-user managed or a per-machine application which is in advertise state.

Available in Windows Installer version 3.0.
1701
[2] is not a valid entry for a product ID.


1702
Configuring [2] cannot be completed until you restart your system. To restart now and resume configuration click Yes, or click No to stop this configuration.


1703
For the configuration changes made to [2] to take effect you must restart your system. To restart now click Yes, or click No if you plan to manually restart at a later time.


1704
An install for [2] is currently suspended. You must undo the changes made by that install to continue. Do you want to undo those changes?


1705
A previous install for this product is in progress. You must undo the changes made by that install to continue. Do you want to undo those changes?


1706
No valid source could be found for product [2].


1707
Installation operation completed successfully.


1708
Installation operation failed.


1709
Product: [2] -- [3]


1710
You may either restore your computer to its previous state or continue the install later. Would you like to restore?


1711
An error occurred while writing installation information to disk. Check to make sure enough disk space is available, and click Retry, or Cancel to end the install.


1712
One or more of the files required to restore your computer to its previous state could not be found. Restoration will not be possible.


1713
[2] cannot install one of its required products. Contact your technical support group. System Error: [3].

Available with Windows Installer version 1.2 and later.
1714
The older version of [2] cannot be removed. Contact your technical support group. System Error [3].

Available with Windows Installer version 1.2 and later
1715
Installed [2].

Available with Windows Installer version 1.2 and later.
1716
Configured [2].

Available with Windows Installer version 1.2 and later.
1717
Removed [2].

Available with Windows Installer version 1.2 and later.
1718
File [2] was rejected by digital signature policy.

Available with Windows Installer version 2.0.
1719
Windows Installer service could not be accessed. Contact your support personnel to verify that it is properly registered and enabled.

Available with Windows Installer version 2.0.
1720
There is a problem with this Windows Installer package. A script required for this install to complete could not be run. Contact your support personnel or package vendor. Custom action [2] script error [3], [4]: [5] Line [6], Column [7], [8]

Available in Windows Installer version 2.0.
1721
There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor. Action: [2], location: [3], command: [4]

Available in Windows Installer version 2.0.
1722
There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action [2], location: [3], command: [4]

Available in Windows Installer version 2.0.
1723
There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor. Action [2], entry: [3], library: [4]

Available in Windows Installer version 2.0.
1724
Removal completed successfully.

Available with Windows Installer version 2.0.
1725
Removal failed.

Available with Windows Installer version 2.0.
1726
Advertisement completed successfully.

Available with Windows Installer version 2.0.
1727
Advertisement failed.

Available with Windows Installer version 2.0.
1728
Configuration completed successfully.

Available with Windows Installer version 2.0.
1729
Configuration failed.

Available with Windows Installer version 2.0.
1730
You must be an Administrator to remove this application. To remove this application, you can log on as an administrator, or contact your technical support group for assistance.

Available on Windows Installer version 2.0.
1731
The source installation package for the product [2] is out of sync with the client package. Try the installation again using a valid copy of the installation package '[3]'.

Available beginning with Windows Installer version 2.0 for Windows Server 2003.
1732
In order to complete the installation of [2], you must restart the computer. Other users are currently logged on to this computer, and restarting may cause them to lose their work. Do you want to restart now?

Available beginning with Windows Installer version 2.0 for Windows Server 2003.
1801
The path [2] is not valid


1802
Out of memory


1803
There is no disk in drive [2]. Please, insert one and click Retry, or click Cancel to go back to the previously selected volume.


1804
There is no disk in drive [2]. Please, insert one and click Retry, or click Cancel to return to the browse dialog and select a different volume.


1805
The path [2] does not exist


1806
You have insufficient privileges to read this folder.


1807
A valid destination folder for the install could not be determined.


1901
Error attempting to read from the source install database: [2]


1902
Scheduling restart operation: Renaming file [2] to [3]. Must restart to complete operation.


1903
Scheduling restart operation: Deleting file [2]. Must restart to complete operation.


1904
Module [2] failed to register. HRESULT [3].


1905
Module [2] failed to unregister. HRESULT [3].


1906
Failed to cache package [2]. Error: [3]


1907
Could not register font [2]. Verify that you have sufficient permissions to install fonts, and that the system supports this font.


1908
Could not unregister font [2]. Verify that you have sufficient permissions to remove fonts.


1909
Could not create shortcut [2]. Verify that the destination folder exists and that you can access it.


1910
Could not remove shortcut [2]. Verify that the shortcut file exists and that you can access it.


1911
Could not register type library for file [2]. Contact your support personnel.


1912
Could not unregister type library for file [2]. Contact your support personnel.


1913
Could not update the .ini file [2][3]. Verify that the file exists and that you can access it.


1914
Could not schedule file [2] to replace file [3] on restart. Verify that you have write permissions to file [3].


1915
Error removing ODBC driver manager, ODBC error [2]: [3]. Contact your support personnel.


1916
Error installing ODBC driver manager, ODBC error [2]: [3]. Contact your support personnel.


1917
Error removing ODBC driver: [4], ODBC error [2]: [3]. Verify that you have sufficient privileges to remove ODBC drivers.


1918
Error installing ODBC driver: [4], ODBC error [2]: [3]. Verify that the file [4] exists and that you can access it.


1919
Error configuring ODBC data source: [4], ODBC error [2]: [3]. Verify that the file [4] exists and that you can access it.


1920
Service '[2]' ([3]) failed to start. Verify that you have sufficient privileges to start system services.


1921
Service '[2]' ([3]) could not be stopped. Verify that you have sufficient privileges to stop system services.


1922
Service '[2]' ([3]) could not be deleted. Verify that you have sufficient privileges to remove system services.


1923
Service '[2]' ([3]) could not be installed. Verify that you have sufficient privileges to install system services.


1924
Could not update environment variable '[2]'. Verify that you have sufficient privileges to modify environment variables.


1925
You do not have sufficient privileges to complete this installation for all users of the machine. Log on as administrator and then retry this installation.


1926
Could not set file security for file '[3]'. Error: [2]. Verify that you have sufficient privileges to modify the security permissions for this file.


1927
The installation requires COM+ Services to be installed.

Available with Windows Installer version 1.1 and later.
1928
The installation failed to install the COM+ Application.

Available with Windows Installer version 1.1 and later.
1929
The installation failed to remove the COM+ Application.

Available with Windows Installer version 1.1 and later.
1930
The description for service '[2]' ([3]) could not be changed.

Available with Windows Installer version 1.1 and later.
1931
The Windows Installer service cannot update the system file [2] because the file is protected by Windows. You may need to update your operating system for this program to work correctly. Package version: [3], OS Protected version: [4]

Available with Windows Installer version 1.1 and later.
1932
The Windows Installer service cannot update the protected Windows file [2]. Package version: [3], OS Protected version: [4], SFP Error: [5]

Available with Windows Installer version 1.1 and later.
1933
The Windows Installer service cannot update one or more protected Windows files. SFP Error: [2]. List of protected files:\r\n[3]

Available with Windows Installer version 2.0.
1934
User installations are disabled through policy on the machine.

Available with Windows Installer version 2.0.
1935
An error occurred during the installation of assembly component [2]. HRESULT: [3]. {{assembly interface: [4], function: [5], assembly name: [6]}}

Available with Windows Installer version 2.0.
1935
An error occurred during the installation of assembly '[6]'. Please refer to Help and Support for more information. HRESULT: [3]. {{assembly interface: [4], function: [5], component: [2]}}

Available beginning with Windows Installer version 2.0 for Windows Server 2003..
1936
An error occurred during the installation of assembly '[6]'. The assembly is not strongly named or is not signed with the minimal key length. HRESULT: [3]. {{assembly interface: [4], function: [5], component: [2]}}

Available beginning with Windows Installer version 2.0 for Windows Server 2003.
1937
An error occurred during the installation of assembly '[6]'. The signature or catalog could not be verified or is not valid. HRESULT: [3]. {{assembly interface: [4], function: [5], component: [2]}}

Available beginning with Windows Installer version 2.0 for Windows Server 2003.
1938
An error occurred during the installation of assembly '[6]'. One or more modules of the assembly could not be found. HRESULT: [3]. {{assembly interface: [4], function: [5], component: [2]}}

Available beginning with Windows Installer version 2.0 for Windows Server 2003.
2101
Shortcuts not supported by the operating system.


2102
Invalid .ini action: [2]


2103
Could not resolve path for shell folder [2].


2104
Writing .ini file: [3]: System error: [2].


2105
Shortcut Creation [3] Failed. System error: [2].


2106
Shortcut Deletion [3] Failed. System error: [2].


2107
Error [3] registering type library [2].


2108
Error [3] unregistering type library [2].


2109
Section missing for .ini action.


2110
Key missing for .ini action.


2111
Detection of running applications failed, could not get performance data. Registered operation returned : [2].


2112
Detection of running applications failed, could not get performance index. Registered operation returned : [2].


2113
Detection of running applications failed.


2200
Database: [2]. Database object creation failed, mode = [3].


2201
Database: [2]. Initialization failed, out of memory.


2202
Database: [2]. Data access failed, out of memory.


2203
Database: [2]. Cannot open database file. System error [3].


2204
Database: [2]. Table already exists: [3].


2205
Database: [2]. Table does not exist: [3].


2206
Database: [2]. Table could not be dropped: [3].


2207
Database: [2]. Intent violation.


2208
Database: [2]. Insufficient parameters for Execute.


2209
Database: [2]. Cursor in invalid state.


2210
Database: [2]. Invalid update data type in column [3].


2211
Database: [2]. Could not create database table [3].


2212
Database: [2]. Database not in writable state.


2213
Database: [2]. Error saving database tables.


2214
Database: [2]. Error writing export file: [3].


2215
Database: [2]. Cannot open import file: [3].


2216
Database: [2]. Import file format error: [3], Line [4].


2217
Database: [2]. Wrong state to CreateOutputDatabase [3].


2218
Database: [2]. Table name not supplied.


2219
Database: [2]. Invalid Installer database format.


2220
Database: [2]. Invalid row/field data.


2221
Database: [2]. Code page conflict in import file: [3].


2222
Database: [2]. Transform or merge code page [3] differs from database code page [4].


2223
Database: [2]. Databases are the same. No transform generated.


2224
Database: [2]. GenerateTransform: Database corrupt. Table: [3].


2225
Database: [2]. Transform: Cannot transform a temporary table. Table: [3].


2226
Database: [2]. Transform failed.


2227
Database: [2]. Invalid identifier '[3]' in SQL query: [4].


2228
Database: [2]. Unknown table '[3]' in SQL query: [4].


2229
Database: [2]. Could not load table '[3]' in SQL query: [4].


2230
Database: [2]. Repeated table '[3]' in SQL query: [4].


2231
Database: [2]. Missing ')' in SQL query: [3].


2232
Database: [2]. Unexpected token '[3]' in SQL query: [4].


2233
Database: [2]. No columns in SELECT clause in SQL query: [3].


2234
Database: [2]. No columns in ORDER BY clause in SQL query: [3].


2235
Database: [2]. Column '[3]' not present or ambiguous in SQL query: [4].


2236
Database: [2]. Invalid operator '[3]' in SQL query: [4].


2237
Database: [2]. Invalid or missing query string: [3].


2238
Database: [2]. Missing FROM clause in SQL query: [3].


2239
Database: [2]. Insufficient values in INSERT SQL statement.


2240
Database: [2]. Missing update columns in UPDATE SQL statement.


2241
Database: [2]. Missing insert columns in INSERT SQL statement.


2242
Database: [2]. Column '[3]' repeated.


2243
Database: [2]. No primary columns defined for table creation.


2244
Database: [2]. Invalid type specifier '[3]' in SQL query [4].


2245
IStorage::Stat failed with error [3].


2246
Database: [2]. Invalid Installer transform format.


2247
Database: [2] Transform stream read/write failure.


2248
Database: [2] GenerateTransform/Merge: Column type in base table does not match reference table. Table: [3] Col #: [4].


2249
Database: [2] GenerateTransform: More columns in base table than in reference table. Table: [3].


2250
Database: [2] Transform: Cannot add existing row. Table: [3].


2251
Database: [2] Transform: Cannot delete row that does not exist. Table: [3].


2252
Database: [2] Transform: Cannot add existing table. Table: [3].


2253
Database: [2] Transform: Cannot delete table that does not exist. Table: [3].


2254
Database: [2] Transform: Cannot update row that does not exist. Table: [3].


2255
Database: [2] Transform: Column with this name already exists. Table: [3] Col: [4].


2256
Database: [2] GenerateTransform/Merge: Number of primary keys in base table does not match reference table. Table: [3].


2257
Database: [2]. Intent to modify read only table: [3].


2258
Database: [2]. Type mismatch in parameter: [3].


2259
Database: [2] Table(s) Update failed


2260
Storage CopyTo failed. System error: [3].


2261
Could not remove stream [2]. System error: [3].


2262
Stream does not exist: [2]. System error: [3].


2263
Could not open stream [2]. System error: [3].


2264
Could not remove stream [2]. System error: [3].


2265
Could not commit storage. System error: [3].


2266
Could not rollback storage. System error: [3].


2267
Could not delete storage [2]. System error: [3].


2268
Database: [2]. Merge: There were merge conflicts reported in [3] tables.


2269
Database: [2]. Merge: The column count differed in the '[3]' table of the two databases.


2270
Database: [2]. GenerateTransform/Merge: Column name in base table does not match reference table. Table: [3] Col #: [4].


2271
SummaryInformation write for transform failed.


2272
Database: [2]. MergeDatabase will not write any changes because the database is open read-only.


2273
Database: [2]. MergeDatabase: A reference to the base database was passed as the reference database.


2274
Database: [2]. MergeDatabase: Unable to write errors to Error table. Could be due to a non-nullable column in a predefined Error table.


2275
Database: [2]. Specified Modify [3] operation invalid for table joins.


2276
Database: [2]. Code page [3] not supported by the system.


2277
Database: [2]. Failed to save table [3].


2278
Database: [2]. Exceeded number of expressions limit of 32 in WHERE clause of SQL query: [3].


2279
Database: [2] Transform: Too many columns in base table [3].


2280
Database: [2]. Could not create column [3] for table [4].


2281
Could not rename stream [2]. System error: [3].


2282
Stream name invalid [2].


2302
Patch notify: [2] bytes patched to far.


2303
Error getting volume info. GetLastError: [2].


2304
Error getting disk free space. GetLastError: [2]. Volume: [3].


2305
Error waiting for patch thread. GetLastError: [2].


2306
Could not create thread for patch application. GetLastError: [2].


2307
Source file key name is null.


2308
Destination file name is null.


2309
Attempting to patch file [2] when patch already in progress.


2310
Attempting to continue patch when no patch is in progress.


2315
Missing path separator: [2].


2318
File does not exist: [2].


2319
Error setting file attribute: [3] GetLastError: [2].


2320
File not writable: [2].


2321
Error creating file: [2].


2322
User canceled.


2323
Invalid file attribute.


2324
Could not open file: [3] GetLastError: [2].


2325
Could not get file time for file: [3] GetLastError: [2].


2326
Error in FileToDosDateTime.


2327
Could not remove directory: [3] GetLastError: [2].


2328
Error getting file version info for file: [2].


2329
Error deleting file: [3]. GetLastError: [2].


2330
Error getting file attributes: [3]. GetLastError: [2].


2331
Error loading library [2] or finding entry point [3].


2332
Error getting file attributes. GetLastError: [2].


2333
Error setting file attributes. GetLastError: [2].


2334
Error converting file time to local time for file: [3]. GetLastError: [2].


2335
Path: [2] is not a parent of [3].


2336
Error creating temp file on path: [3]. GetLastError: [2].

Available on Windows Installer version 1.2 and earlier.
2337
Could not close file: [3] GetLastError: [2].


2338
Could not update resource for file: [3] GetLastError: [2].


2339
Could not set file time for file: [3] GetLastError: [2].


2340
Could not update resource for file: [3], Missing resource.


2341
Could not update resource for file: [3], Resource too large.


2342
Could not update resource for file: [3] GetLastError: [2].


2343
Specified path is empty.


2344
Could not find required file IMAGEHLP.DLL to validate file:[2].


2345
[2]: File does not contain a valid checksum value.


2347
User ignore.


2348
Error attempting to read from cabinet stream.


2349
Copy resumed with different info.


2350
FDI server error


2351
File key '[2]' not found in cabinet '[3]'. The installation cannot continue.

Available on Windows Installer version 1.2 and earlier.
2352
Could not initialize cabinet file server. The required file 'CABINET.DLL' may be missing.


2353
Not a cabinet.


2354
Cannot handle cabinet.


2355
Corrupt cabinet.

Available on Windows Installer version 1.2 and earlier.
2356
Could not locate cabinet in stream: [2].


2357
Cannot set attributes.


2358
Error determining whether file is in-use: [3]. GetLastError: [2].


2359
Unable to create the target file - file may be in use.


2360
Progress tick.


2361
Need next cabinet.


2362
Folder not found: [2].


2363
Could not enumerate subfolders for folder: [2].


2364
Bad enumeration constant in CreateCopier call.


2365
Could not BindImage exe file [2].


2366
User failure.


2367
User abort.


2368
Failed to get network resource information. Error [2], network path [3]. Extended error: network provider [5], error code [4], error description [6].


2370
Invalid CRC checksum value for [2] file.{ Its header says [3] for checksum, its computed value is [4].}

Available with Windows Installer version 2.0.
2371
Could not apply patch to file [2]. GetLastError: [3].

Available on Windows Installer version 1.2 and earlier.
2372
Patch file [2] is corrupt or of an invalid format. Attempting to patch file [3]. GetLastError: [4].

Available on Windows Installer version 1.2 and earlier.
2373
File [2] is not a valid patch file.

Available on Windows Installer version 1.2 and earlier.
2374
File [2] is not a valid destination file for patch file [3].

Available on Windows Installer version 1.2 and earlier.
2375
Unknown patching error: [2].

Available on Windows Installer version 1.2 and earlier.
2376
Cabinet not found.


2379
Error opening file for read: [3] GetLastError: [2].


2380
Error opening file for write: [3]. GetLastError: [2].


2381
Directory does not exist: [2].


2382
Drive not ready: [2].


2401
64-bit registry operation attempted on 32-bit operating system for key [2].

Available on Windows Installer version 2.0.
2402
Out of memory.

Available on Windows Installer version 2.0.
2501
Could not create rollback script enumerator.


2502
Called InstallFinalize when no install in progress.


2503
Called RunScript when not marked in progress.


2601
Invalid value for property [2]: '[3]'


2602
The [2] table entry '[3]' has no associated entry in the Media table.


2603
Duplicate table name [2].


2604
[2] Property undefined.


2605
Could not find server [2] in [3] or [4].


2606
Value of property [2] is not a valid full path: '[3]'.


2607
Media table not found or empty (required for installation of files).


2608
Could not create security descriptor for object. Error: '[2]'.


2609
Attempt to migrate product settings before initialization.


2611
The file [2] is marked as compressed, but the associated media entry does not specify a cabinet.


2612
Stream not found in '[2]' column. Primary key: '[3]'.


2613
RemoveExistingProducts action sequenced incorrectly.

Available with Windows Installer version 1.1 and later.
2614
Could not access IStorage object from installation package.

Available with Windows Installer version 1.1 and later.
2615
Skipped unregistration of Module [2] due to source resolution failure.

Available with Windows Installer version 1.1 and later.
2616
Companion file [2] parent missing.

Available with Windows Installer version 1.1 and later.
2617
Shared component [2] not found in Component table.

Available with Windows Installer version 1.1 and later.
2618
Isolated application component [2] not found in Component table.

Available with Windows Installer version 1.1 and later.
2619
Isolated components [2], [3] not part of same feature.

Available with Windows Installer version 1.1 and later.
2620
Key file of isolated application component [2] not in File table.

Available with Windows Installer version 1.1 and later.
2701
The Component table exceeds the acceptable tree depth of [2] levels.


2702
A Feature table record ([2]) references a non-existent parent in the Attributes field.


2703
Property name for root source path not defined: [2]


2704
Root directory property undefined: [2]


2705
Invalid table: [2]; Could not be linked as tree.


2706
Source paths not created. No path exists for entry [2] in Directory table.


2707
Target paths not created. No path exists for entry [2] in Directory table.


2708
No entries found in the file table.


2709
The specified Component name ('[2]') not found in Component table.


2710
The requested 'Select' state is illegal for this Component.


2711
The specified Feature name ('[2]') not found in Feature table.


2712
Invalid return from modeless dialog: [3], in action [2].


2713
Null value in a non-nullable column ('[2]' in '[3]' column of the '[4]' table.


2714
Invalid value for default folder name: [2].


2715
The specified File key ('[2]') not found in the File table.


2716
Could not create a random subcomponent name for component '[2]'.


2717
Bad action condition or error calling custom action '[2]'.


2718
Missing package name for product code '[2]'.


2719
Neither UNC nor drive letter path found in source '[2]'.


2720
Error opening source list key. Error: '[2]'


2721
Custom action [2] not found in Binary table stream.


2722
Custom action [2] not found in File table.


2723
Custom action [2] specifies unsupported type.


2724
The volume label '[2]' on the media you're running from does not match the label '[3]' given in the Media table. This is allowed only if you have only 1 entry in your Media table.


2725
Invalid database tables


2726
Action not found: [2].


2727
The directory entry '[2]' does not exist in the Directory table.


2728
Table definition error: [2]


2729
Install engine not initialized.


2730
Bad value in database. Table: '[2]'; Primary key: '[3]'; Column: '[4]'


2731
Selection Manager not initialized.

The selection manager is responsible for determining component and feature states. It is initialized during the costing actions. A standard action or custom action made a call to a function requiring the selection manager before the initialization of the selection manager. This action should be sequenced after the costing actions.
2732
Directory Manager not initialized.

The directory manager is responsible for determining the target and source paths. It is initialized during the costing actions. A standard action or custom action made a call to a function requiring the directory manager before the initialization of the directory manager. This action should be sequenced after the costing actions.
2733
Bad foreign key ('[2]') in '[3]' column of the '[4]' table.


2734
Invalid reinstall mode character.


2735
Custom action '[2]' has caused an unhandled exception and has been stopped. This may be the result of an internal error in the custom action, such as an access violation.


2736
Generation of custom action temp file failed: [2].


2737
Could not access custom action [2], entry [3], library [4]

Available in Windows Installer versions 1.0, 1.1, and 1.2.
2738
Could not access VBScript run time for custom action [2].


2739
Could not access JavaScript run time for custom action [2].


2740
Custom action [2] script error [3], [4]: [5] Line [6], Column [7], [8].

Available in Windows Installer versions 1.0, 1.1, and 1.2.
2741
Configuration information for product [2] is corrupt. Invalid info: [2].


2742
Marshaling to Server failed: [2].


2743
Could not execute custom action [2], location: [3], command: [4].

Available in Windows Installer versions 1.0, 1.1, and 1.2.
2744
EXE failed called by custom action [2], location: [3], command: [4].

Available in Windows Installer versions 1.0, 1.1, and 1.2.
2745
Transform [2] invalid for package [3]. Expected language [4], found language [5].


2746
Transform [2] invalid for package [3]. Expected product [4], found product [5].


2747
Transform [2] invalid for package [3]. Expected product version < [4], found product version [5].


2748
Transform [2] invalid for package [3]. Expected product version <= [4], found product version [5].


2749
Transform [2] invalid for package [3]. Expected product version == [4], found product version [5].


2750
Transform [2] invalid for package [3]. Expected product version >= [4], found product version [5].


2751
Transform [2] invalid for package [3]. Expected product version > [4], found product version [5].


2752
Could not open transform [2] stored as child storage of package [4].


2753
The File '[2]' is not marked for installation.


2754
The File '[2]' is not a valid patch file.


2755
Server returned unexpected error [2] attempting to install package [3].


2756
The property '[2]' was used as a directory property in one or more tables, but no value was ever assigned.


2757
Could not create summary info for transform [2].


2758
Transform [2] does not contain an MSI version.


2759
Transform [2] version [3] incompatible with engine; Min: [4], Max: [5].


2760
Transform [2] invalid for package [3]. Expected upgrade code [4], found [5].


2761
Cannot begin transaction. Global mutex not properly initialized.


2762
Cannot write script record. Transaction not started.


2763
Cannot run script. Transaction not started.


2765
Assembly name missing from AssemblyName table : Component: [4].

Available with Windows Installer version 2.0.
2766
The file [2] is an invalid MSI storage file.

Available with Windows Installer version 2.0.
2767
No more data{ while enumerating [2]}.

Available with Windows Installer version 2.0.
2768
Transform in patch package is invalid.

Available with Windows Installer version 2.0.
2769
Custom Action [2] did not close [3] MSIHANDLEs.

Available with Windows Installer version 2.0.
2770
Cached folder [2] not defined in internal cache folder table.

Available with Windows Installer version 2.0.
2771
Upgrade of feature [2] has a missing component. .

Available beginning with Windows Installer version 3.0.
2772
New upgrade feature [2] must be a leaf feature.

Available beginning with Windows Installer version 3.0.
2801
Unknown Message -- Type [2]. No action is taken.


2802
No publisher is found for the event [2].


2803
Dialog View did not find a record for the dialog [2].


2804
On activation of the control [3] on dialog [2] CMsiDialog failed to evaluate the condition [3].


2805



2806
The dialog [2] failed to evaluate the condition [3].


2807
The action [2] is not recognized.


2808
Default button is ill-defined on dialog [2].


2809
On the dialog [2] the next control pointers do not form a cycle. There is a pointer from [3] to [4], but there is no further pointer.


2810
On the dialog [2] the next control pointers do not form a cycle. There is a pointer from both [3] and [5] to [4].


2811
On dialog [2] control [3] has to take focus, but it is unable to do so.


2812
The event [2] is not recognized.


2813
The EndDialog event was called with the argument [2], but the dialog has a parent


2814
On the dialog [2] the control [3] names a nonexistent control [4] as the next control.


2815
ControlCondition table has a row without condition for the dialog [2].


2816
The EventMapping table refers to an invalid control [4] on dialog [2] for the event [3].


2817
The event [2] failed to set the attribute for the control [4] on dialog [3].


2818
In the ControlEvent table EndDialog has an unrecognized argument [2].


2819
Control [3] on dialog [2] needs a property linked to it.


2820
Attempted to initialize an already initialized handler.


2821
Attempted to initialize an already initialized dialog: [2].


2822
No other method can be called on dialog [2] until all the controls are added.


2823
Attempted to initialize an already initialized control: [3] on dialog [2].


2824
The dialog attribute [3] needs a record of at least [2] field(s).


2825
The control attribute [3] needs a record of at least [2] field(s).


2826
Control [3] on dialog [2] extends beyond the boundaries of the dialog [4] by [5] pixels.


2827
The button [4] on the radio button group [3] on dialog [2] extends beyond the boundaries of the group [5] by [6] pixels.


2828
Tried to remove control [3] from dialog [2], but the control is not part of the dialog.


2829
Attempt to use an uninitialized dialog.


2830
Attempt to use an uninitialized control on dialog [2].


2831
The control [3] on dialog [2] does not support [5] the attribute [4].


2832
The dialog [2] does not support the attribute [3].


2833
Control [4] on dialog [3] ignored the message [2].


2834
The next pointers on the dialog [2] do not form a single loop.


2835
The control [2] was not found on dialog [3].


2836
The control [3] on the dialog [2] cannot take focus.


2837
The control [3] on dialog [2] wants the winproc to return [4].


2838
The item [2] in the selection table has itself as a parent.


2839
Setting the property [2] failed.


2840
Error dialog name mismatch.


2841
No OK button was found on the error dialog.


2842
No text field was found on the error dialog.


2843
The ErrorString attribute is not supported for standard dialogs.


2844
Cannot execute an error dialog if the Errorstring is not set.


2845
The total width of the buttons exceeds the size of the error dialog.


2846
SetFocus did not find the required control on the error dialog.


2847
The control [3] on dialog [2] has both the icon and the bitmap style set.


2848
Tried to set control [3] as the default button on dialog [2], but the control does not exist.


2849
The control [3] on dialog [2] is of a type, that cannot be integer valued.


2850
Unrecognized volume type.


2851
The data for the icon [2] is not valid.


2852
At least one control has to be added to dialog [2] before it is used.


2853
Dialog [2] is a modeless dialog. The execute method should not be called on it.


2854
On the dialog [2] the control [3] is designated as first active control, but there is no such control.


2855
The radio button group [3] on dialog [2] has fewer than 2 buttons.


2856
Creating a second copy of the dialog [2].


2857
The directory [2] is mentioned in the selection table but not found.


2858
The data for the bitmap [2] is not valid.


2859
Test error message.


2860
Cancel button is ill-defined on dialog [2].


2861
The next pointers for the radio buttons on dialog [2] control [3] do not form a cycle.


2862
The attributes for the control [3] on dialog [2] do not define a valid icon size. Setting the size to 16.


2863
The control [3] on dialog [2] needs the icon [4] in size [5]x[5], but that size is not available. Loading the first available size.


2864
The control [3] on dialog [2] received a browse event, but there is no configurable directory for the present selection. Likely cause: browse button is not authored correctly.


2865
Control [3] on billboard [2] extends beyond the boundaries of the billboard [4] by [5] pixels.


2866
The dialog [2] is not allowed to return the argument [3].


2867
The error dialog property is not set.


2868
The error dialog [2] does not have the error style bit set.


2869
The dialog [2] has the error style bit set, but is not an error dialog.


2870
The help string [4] for control [3] on dialog [2] does not contain the separator character.


2871
The [2] table is out of date: [3].


2872
The argument of the CheckPath control event on dialog [2] is invalid.


2873
On the dialog [2] the control [3] has an invalid string length limit: [4].


2874
Changing the text font to [2] failed.


2875
Changing the text color to [2] failed.


2876
The control [3] on dialog [2] had to truncate the string: [4].


2877
The binary data [2] was not found


2878
On the dialog [2] the control [3] has a possible value: [4]. This is an invalid or duplicate value.


2879
The control [3] on dialog [2] cannot parse the mask string: [4].


2880
Do not perform the remaining control events.


2881
CMsiHandler initialization failed.


2882
Dialog window class registration failed.


2883
CreateNewDialog failed for the dialog [2].


2884
Failed to create a window for the dialog [2].


2885
Failed to create the control [3] on the dialog [2].


2886
Creating the [2] table failed.


2887
Creating a cursor to the [2] table failed.


2888
Executing the [2] view failed.


2889
Creating the window for the control [3] on dialog [2] failed.


2890
The handler failed in creating an initialized dialog.


2891
Failed to destroy window for dialog [2].


2892
[2] is an integer only control, [3] is not a valid integer value.


2893
The control [3] on dialog [2] can accept property values that are at most [5] characters long. The value [4] exceeds this limit, and has been truncated.


2894
Loading RICHED20.DLL failed. GetLastError() returned: [2].


2895
Freeing RICHED20.DLL failed. GetLastError() returned: [2].


2896
Executing action [2] failed.


2897
Failed to create any [2] font on this system.


2898
For [2] textstyle, the system created a '[3]' font, in [4] character set.


2899
Failed to create [2] textstyle. GetLastError() returned: [3].

Available with Windows Installer version 1.1 and later.
2901
Invalid parameter to operation [2]: Parameter [3].


2902
Operation [2] called out of sequence.


2903
The file [2] is missing.


2904
Could not BindImage file [2].


2905
Could not read record from script file [2].


2906
Missing header in script file [2].


2907
Could not create secure security descriptor. Error: [2].


2908
Could not register component [2].


2909
Could not unregister component [2].


2910
Could not determine user's security ID.


2911
Could not remove the folder [2].


2912
Could not schedule file [2] for removal on restart.


2919
No cabinet specified for compressed file: [2].


2920
Source directory not specified for file [2].


2924
Script [2] version unsupported. Script version: [3], minimum version: [4], maximum version: [5].


2927
ShellFolder id [2] is invalid.


2928
Exceeded maximum number of sources. Skipping source '[2]'.


2929
Could not determine publishing root. Error: [2].


2932
Could not create file [2] from script data. Error: [3].


2933
Could not initialize rollback script [2].


2934
Could not secure transform [2]. Error [3].


2935
Could not unsecure transform [2]. Error [3].


2936
Could not find transform [2].


2937
Windows Installer cannot install a system file protection catalog. Catalog: [2], Error: [3].

Available with Windows Installer version 1.2 and later.
2938
Windows Installer cannot retrieve a system file protection catalog from the cache. Catalog: [2], Error: [3].

Available with Windows Installer version 1.2 and later.
2939
Windows Installer cannot delete a system file protection catalog from the cache. Catalog: [2], Error: [3].

Available with Windows Installer version 1.2 and later.
2940
Directory Manager not supplied for source resolution.

Available with Windows Installer version 2.0.
2941
Unable to compute the CRC for file [2].

Available with Windows Installer version 2.0.
2942
BindImage action has not been executed on [2] file.

Available with Windows Installer version 2.0.
2943
This version of Windows does not support deploying 64-bit packages. The script [2] is for a 64-bit package.

Available with Windows Installer version 2.0.
2944
GetProductAssignmentType failed.

Available with Windows Installer version 2.0.
2945
Installation of ComPlus App [2] failed with error [3].

Available with Windows Installer version 2.0.
3001
The patches in this list contain incorrect sequencing information: [2][3][4][5][6][7][8][9][10][11][12][13][14][15][16].

Available beginning with Windows Installer version 3.0
3002
Patch [2] contains invalid sequencing information.

Available beginning with Windows Installer version 3.0



Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.